GARMIN GHC 10 Marine Autopilot Control Unit GHC-10 GHC10 NMEA2000 Controller

Description

GARMIN GHC 10 Marine Autopilot Control Unit GHC-10 GHC10 NMEA2000

For spare parts or repair only. Display with sun burn – please refer to the photos. Otherwise works.

*****

The GHC 10 is the dedicated control unit for the GHP™ 10 and GHP 12 autopilot systems.

Handle your Boat with Convenience and Safety

The simple, interactive interface of the GHC 10 gives boaters the confidence and security of controlling the heading of the boat at the press of a key. For example, each press of the steering soft key will change the commanded heading of the autopilot by 1 °. And as a safeguard, a dedicated “Standby” key allows you to instantly place the autopilot in standby to keep it from re-engaging.

Connect to other Marine Units

The GHC 10 communicates with the GHP 10 and GHP 12 autopilot systems via a NMEA 2000® bus, so autopilot heading data easily can be shared with other devices.

The GHC 10 also has the capability of communicating to a chartplotter for GPS-enabled route guidance over NMEA 2000 or NMEA 0183.

Unit dimensions, WxHxD: 4 5/16″ x 4 3/8 ” x 1 29/32″ (109 x 111 x 48 mm)

Weight: 9.6 oz (272 g)

Cables: NMEA 0183 data, 6 ft (1.8 m); NMEA 2000® drop and power, 6.5 ft (2 m)

Temperature range: From 5° F to 158° (from -15° C to 70° C)

Compass-safe distance: 9.5″ (241 mm)

Case material: Fully gasketed, high-impact aluminum alloy; waterproof to IPX7

Power usage: 2.5 W max.

NMEA 2000 input voltage: 9-16 Vdc

NMEA 2000 LEN: 6 (300 mA)