SIMRAD ROBERTSON MSD50 Stern Drive Unit 21119391 Volvo Mercruiser OMC Yamaha

Description

SIMRAD ROBERTSON MSD50 Stern Drive Unit 21119391 Volvo Mercruiser OMC Yamaha

Professionally refurbished with 1 year of guarantee.

Including the installation Kit no. 2 P/N 21119656 for:

– Volvo Penta Gas engines/DP-S drives from 1997

– “All” Mercruiser models up to 1993.

– Mercruiser diesel from 1993 and later

– OMC and Yamaha

Please refer to the photos.

Complete autopilot drive, ready to install.

******

The MSD50 is attached to the servo unit and operates the servo valve in the same way as the push-pull (“Teleflex”) cable from the helm. The MSD50 generates a feedback signal to the autopilot which is relative to the motion of the actuator rod and can only be operated from autopilots that are using the AC10, AC20, AC40 autopilot computers or J300X, J300X-40 and J3000X junction units.

The MSD50 can be installed on stern drives with power assisted steering of the type Volvo, Mercruiser, Yamaha and OMC.

Weight:  1,8 kg

Protection: IP44

Motor supply from autopilot computer/junction unit: 5 – 14V DC

Thrust: 500 N

Stroke length: 190 mm

Actuator speed at nominal voltage: 15 mm/sec.

Ambient temperature:

Storage –30 – +80°C

Operation 0 – +55°C

Maximum power consumption: 40W

SIMRAD MSD50 Mechanical Stern Drive. On stern drive boats (inboard/outboard) with power assisted steering, the Simrad MSD50 stern drive unit will operate the servo valve to automatically steer the boat.

The MSD50 can be installed on stern drives with power assisted steering of the type Volvo, Mercruiser, Yamaha, and OMC.

Four different types of mounting kits are available – KIT NR 2 IS INCLUDED IN THIS SET!

Due to the different stern drives and different boat models, it is important to verify that the MSD50 will fit the actual stern drive in the particular boat.

Particular attention has to be made to the positioning of the washers and the plastic spacer to get the MSD50 exactly parallel to the linear movement of the servo