ACTISENSE NDC-2-C NMEA MULTIPLEXER / MULTIPLAYER – NMEA0183 PERFECT! GUARANTEE!

SKU: 067-01834 Category:

USD284.05

1 in stock


Normal delivery time is 2-4 days.

Description

ACTISENSE NDC-2-C NMEA MULTIPLEXER / MULTIPLAYER – NMEA0183 PERFECT! GUARANTEE!

 

Works perfectly, fully tested with guarantee.

 

******

NDC-2 NMEA MULTIPLAYER

 

The Actisense NMEA Multiplexer / Combiner allows connection of up to four NMEA (National Marine Electronics Association) inputs to be multiplexed/combined in to one NMEA output.

 

This approach offers these major advantages:

 

Electrical spike protection is provided as standard on all four input channels using opto-isolators. This protects any connected equipment from most system faults; a particularly valuable benefit as equipment requiring the most data, such as a PC or chart plotter, is often the most expensive to repair or replace.

 

The NDC-2 Data Multiplexer contains highly intelligent software that manages the multiplexing and filtering operation, allowing every input to have a chance of its data reaching the combined NMEA output. Tested up to and beyond a combined 300% loading of the four inputs.

 

It enables the vessel owner complete access to all NMEA data sources, instead of the standard one device

Each NMEA input device is Opto-isolated from all other NMEA device in the system

Any NMEA data not required can be easily filtered out to reduce the total amount of NMEA data in the system

Each input and output baud rate can be changed to match the requirements of connected devices

 

*****

Supply voltage

8-35 V

Supply current Supply voltage 12v (no load) 110 – 120mA

Supply voltage 24v (no load)

70 – 75mA

NMEA in/out

Input voltage tolerance Continuous operation

Short Term Operation (<1 sec)

 

-15

-35

 

+15V

+35V

 

Differential input voltage Required level for data to be detected 1.8 – V

Output current RS485/RS422 compatible – 32 mA

Input to output protection Full Galvanic Opto-isolation protection – 2000 V

Baud rate Configurable Baud rate 4800 38400 bps

Data propagation delay

 

1 – 100 msec

RS232 in/out

Input voltage tolerance -15 +15 V

Input voltage threshold Logical LOW

Logical HIGH

 

0.8

1.7

 

1.2V

2.8V

 

Output resistance Output voltage swing +/-2V 300 – ohms

Baud rate Configurable Baud rate 4800 115200 bps

Data propagation delay

 

1 – 100 msec

 

General

Ambient temperature

-20 +70 °C

Logos-trustcompany

Additional information

Weight 0.0 g
Brand

ACTISENSE

Model

NDC-2

Condition

Used